Відео

ye that's true

it's just normal crank start but there's a quik way to do it..rather then holding the key to crank that's all

it might pls goto the website I provided and see gor yourself friend...it's in my full video review

yes sure can..butmost w204 have a button

@@MIKEYZVLOGZ for sure. But i have a C207 and the button doesnt work when i use the esp menu in the cluster (oem cluster)

ok so if your car has the option to turn off the esp from cluster u can do it ..if not and it's like mine where u have a physical button to press and esp turns off then ..using cluster will not work

just like all the other functions...if your car doesn't have the function from factory ..it will not automatically have the function or setting just because you changed cluster ..I hope that clears it up for u friend

@@MIKEYZVLOGZ but you have the button. Can you turn on/off in the button and in the cluster? Or just one?

no that's not possible at the moment

yes 149 aud

Thanks mate. I can see it on sale for $139 so may pick it up.

damn sorry to hear bud. but it should I seriously did exactly that

ye I know.. I only did it this way for ram clearance.. but yes ur suppose to install the left on the right side with the fan bracket to the cooling fins...

I did ...but do not do that... u only need to cut the 2 wires I mentioned...I don't talk about it as it's not part of it .. do as I say not as I do...😂... it was a small oversight...but quickly realised door lights weren't working so reconnected them and now all is well.. so only cut the 2 wires

sure is bright mate trust me cost only 149 aud here in Australia

il try send u a link

yes it should

hey mate ..sorry bout that .. they sell out as well ... I'll do a refresh on the links

Ty

how many ports u using for splitter

@@MIKEYZVLOGZ 2 port, because now i connect tl hub directly to mobo, but it still not detected on li connector 3. And i got issue after new update few days ago

@@triplev5841 that's so strange... mine is just fine

​@@triplev5841i got the same problem. The fans are not showing in the software. Its so frustrating

do not worry there is a good qork around and u can still change colours.. get yourself a sata to 5v3pin adapter they sell on ebay and Amazon and aliexpress is cheapest .. most thing on aliexpress take only 12 days guaranteed now so it's not 1 month delivery like it use to be ...but if ebay easier get it there is u can find it local

@@MIKEYZVLOGZ bro this cooler support LGA 1200???

cheers I appreciate u and welcome to channel happy to have u as part of this community

yes that's right

actually it's the same fix u can fix it the exact same way no difference...at first I thought being a master lock actuator it was different to but after some research..the fix is the exact same mate ... no difference ..all that matters is that the pock get power when u pock and unlock the car .and that's what the two wires do

Yes! Thank you!

I used usb 3.0 to type c adapter ... it's not as fast as type c but at least u have type c port that works

cheers friend I appreciate u mate

according to how they install it it's suppose to be on the right. but I don't see any reason why left side would be wrong ..I always try and follow how they install it... but there are time where I've done the opposite and its fine...thus reason being it shouldn't matter which side the tubes are on it will still pump

should be about 80 to 90 degrees celcius

I f...en love it bron

@@MIKEYZVLOGZhey props to you still. Just installed this and your vid came in clutch. I would just say I had to look at another video to understand the fan orientation and which way it needed to be on. But still helped along the way and now the pc is back up!

cheers mate thanks for subscribing and welcome to the channel... I appreciate u

good tip

I personally wouldn't do thag ..but I've heard ppl do this ..but settings can be re done ...

@@MIKEYZVLOGZ Thank you Mikey I always enjoy your videos, very friendly, thorough. Keep up the good spirit bro

@@hienjean4712 thanks mate I do appreciate your feedback .much love and respect. I appreciate u. welcome to the channel my friend

yes u can...the oil pressure will come from the adapter u install and ur just trying to give it power

@@MIKEYZVLOGZ thank you ：）

there are a few videos already on yourube check them out see if it helps u

@@MIKEYZVLOGZI have everything set up but when I boot the laptop everything works fine but my screen won’t turn on and it flickers every few seconds. I’ve tried to plug it in while windows was booted up but it the screen just freezes and keyboard stops working. Then I tried plugging in the cable to the m2 slot without the dock connected and it does the same exact thing. Any fixes?

@@Zero000vr is it pcie 3.0 ? have u tried selecting gen 3 in bios

@@MIKEYZVLOGZYes it’s pcie 3.0 how would I switch it to gen 3 would I just go into bios and change it. My laptop brand is acer

@Zero000vr I. not too sure as I haven't used an Acer laptop before although it should be under settings look for pcie gen..and select the appropriate gen such as pcie 3.0 gen 3 ... it could help.. go into bios by pressing del key or f2 on boot screen

it was affordable

@@MIKEYZVLOGZ commented this on the wrong video lol

how do u mean?

@@MIKEYZVLOGZ some bug where I clicked on this video and then went back to a different vid but I guess it just bugged so it commented on this one

oh I see

can't tell mate sorry it's sealed

I will try and check and let u know

@@MIKEYZVLOGZ thanks! That would potentially help with keeping everything much cooler instead of relying on one heatsink and still keep the interface.

most welcome friend welcome

hi mate did I say I was going to do that ? I don't remember. there are alot of other videos showing different ways to do this although I might just do a few shorts as a guide on how u can do it

I'm just very busy doing alot of other things but no I haven't sold the car and still plan on doing alot more

ur most welcome mate. glad it helped

just snug it up and make sure tight..don't need a torque setting. as long as u screw it in til it stops..there also should feel like there's too much tension... as u screw it in